I just purchased a new Fibur barrel from the Deadlywind booth at HB NPPL. After arriving home I noticed two issues with my barrel while screwing it on to my CCM S6. First, I noticed there was tons of play with the barrel until it was almost completely screwed on. Second, there is a gap between the back of the barrel and the body of the marker. Has anyone else experienced these issues? If so has it affected the performance of the barrel?
Problem with A/C threaded barrel
Smnthdr
Total Posts:
2
Smnthdr
Total Posts:
2
I recieved a reply from Colin, he explained the reasoning behind the specs on his barrels. Thanks again Colin.
admin
Status: Moderator
Total Posts:
47
CrewNYC
Total Posts:
1
Was wondering what the explanation given was. I just receives my AC Null barrel and noticed the same thing when installed onto my Dangerous Power FX and Empire Axe. There's a small gap between the breach and barrel. I haven't had a chance to put paint through it yet but am concerned since my other barrels are flush when installed.
