**The Fibur-X supersedes The discontinued Fibur.**
Autococker threads are out of stock. ETA mid-June.
Updated tighter bore version (0.697").
The Deadlywind Fibur-X carbon fiber barrels are ultra-lightweight, accurate, and quiet. They utilize the Freak(tm) replaceable inserts, so one barrel and a few inserts will do the job of multiple barrels. And with the ability to affordably swap to different threads, the Fibur-X has you covered!
The Fibur-X barrel system consists of three parts- The thread adapter to match your gun type, a carbon fiber "main-barrel" which is the main part of the barrel (sets the length), and a Freak insert which sets the bore of the barrel. Note- You MUST use a Smart Parts, GoG, Luxe, or Empire "Freak" insert with this barrel.
The Fibur-X is 2x to 4x lighter than other replaceable insert barrels. And it it is strong enough to be driven over with a car (Yes, we have done it-- And we do not suggest you try it on purpose!)
Unlike other carbon fiber barrels, the Fibur-X barrel is built with a unique 3 layer construction. 2x2 satin Twill external, uni-direction fibers laid up in a strong multi-vector pattern, and then a super slick "Silkfiber" inside that can be safely swabbed. CNC align-bored segment for the insert area, CNC-ported with 4 rows of straight ports, and then hand-assembled and quality checked-- You can't get any more accurate.
Already have inserts? Awesome. Need an insert to go with it? Buy one or go with the 3x inserts and save!
Already have a Fibur-X for your Tippmann gun and want to use it on your new Autococker-threaded gun? Pick up a a Fibur-X "AC" thread adapter and you're good to go. (Get them HERE.)
Already have a 12" Fibur-X and want to try a 16"? Get just the longer Fibur-X Main-Barrel and you're set. (Get them HERE.)
We use LEFTY threads to join the Main Barrel to the Thread Adapter- no bits getting stuck in your gun!
You must have at least a "Thread Adapter", a "Main Barrel", and a "Freak insert" to use this barrel system.
Currently available for:
|Fits (but not limited to):
||Fits (but not limited to):
All Dye, DM, & Proto
**NOT Cronus or TiPX**
Diameter too large.
(these are currently rethreaded adapters
with some bare aluminum around