M.O.A.B. - the Mother Of All Barrels.
Manufacturer: Deadlywind
Availability: In stock
Ship to
Shipping Method
Estimated Delivery
No shipping options

The MOAB - Mother Of All Barrels - is the latest revolutionary barrel from Deadlywind LLC.
The MOAB is nothing like any other barrel before.
The MOAB is a patent pending dual-layer barrel design.
The MOAB utilizes a clean monolithic ultra-lightweight carbon fiber outer sleeve which houses, protects, and isolates the internal barrel components.
The MOAB can use either PWR or Freak XL inserts.
The MOAB uses a unique internally ported front sleeve available in multiple bore sizes to perfectly pair with the rear insert bore.
The MOAB is field strippable for full cleaning.
The MOAB can be used with the widest range of guns - uses the existing Deadlywind X-series threaded backs (AC only for PWR inserts).
The MOAB, although it resembles a suppressor, has been cleared by the BATFE for sales and use on all paintball guns.
The MOAB is not susceptible to external port-clogging elements such as precipitation or bunker paint.
The MOAB is available at 14” (14.5” for PWR) and weighs 75 grams without an insert (PWR/XL inserts add 20-25 grams).
The MOAB has been vetted by all levels of paintball players as well as the BATFE and USPTO.

The MOAB consists of:
- A Carbon Fiber outer sleeve with our X-series compatible LEFT handed universal threads.
- Your option of gun threads and insert type to attach to the universal threads (AC threads are only available with PWR inserts).
- Your option(s) of bore on the ported front internal sleeve (0.685, 0.690, 0.695).
- A unique field-strippable front nose clip.
- Available separately or add-on: Control bore insert(s) (PWR or Freak XL).

Extra ported internal front sleeves available here.

Note- You MUST use a PWR or a Freak XL insert with this barrel.
PWR configuration is available only in AC threads.
Freak XL configuration is available for many different gun threads.
Gun threads are set using our existing X-series threaded backs (same as FiburX and FiburX8).
Ported internal front sleeves should ideally be around 0.005" larger than the control (PWR or Freak XL) bore.

YouTube video of how to remove and install the Front Sleeve and nose clip.

Customers who bought this item also bought

MOAB-X8 Front Sleeve

Ported Front Sleeve for the M.O.A.B.

hAir45 V2 trigger valve

hAir45 V2. Trigger valve upgrade for Planet Eclipse mechanical guns.

Deadlywind Thread Adapter

If you need just the Thread Adapter part (aluminum), select from below. This is for just the threaded adapter by itself. Also called a "Back". These ONLY fit our Fibur-X, Fibur-X8, or MOABX8 Barrels.